[9 Anni Sale] 2021 Autel MaxiIM IM608 Avanzata IMMO & Chiave Programming & ECU Codifica con XP400 E J2534 ECU Reprogramme NO IP Limitazione Supporta Italiano

Descrizione del prodotto

Autel MaxiIM IM608 Avanzata IMMO & Chiave Programming & ECU Codifica NO IP Limitazione Supporta Italiano

Autel MaxiIM IM608 Description:

Autel introduces MaxiIM IM608, a state of the art 10-inch Android-based touchscreen tablet combining the most advanced key programming and immobilizer capabilities with OE-level diagnostics and service functions. Equipped with XP400 key programmer and MaxiFlash JVCI ECU programmer, IM608 is a comprehensive immobilizer and key programming tool and ideal for auto technicians and locksmiths.


Autel IM608 Main Features:

• Read & Clear Fault Codes - Short description & code provided (can clear faults & warning lights)
• Service Functions - Oil light / EPB / BMS / SAS / DAF etc
• Access Live Data - Data from the ECU/Modules/sensors displayed in real-time (Oxygen sensor-rich/lean etc)
• Actuation/Component Testing - Actuate (switch on/off) to diagnose functionality (relays, fans, locks etc)
• Coding Functions - Allows you to change vehicle parts that need to be "coded"(Injectors, ABS, starters etc)
• Flashing/Reprogramming - Advanced updating/coding of ECU's online through a J2534 pass-through flashing device
• Advanced Key Programming - IMMO functions, Transponder read/write/identify, MCU/EEPROM chip read/write
Supporto per cambiare le seguenti lingue: inglese, cinese tradizionale, francese, tedesco, olandese, polacco, svedese, coreano, giapponese, russo, italiano

Autel IM608 Main Functions:

I. MaxiIM IM608 IMMO Function:

The immobilizer system will help enhance the security level of your car. The application performs IMMO related functions, such as Key Learning, Remote Control Learning, Learn Immobilizer ECU, Immobilizer Box Reset, Block and Enable Remote Key. 



There are two options available when accessing the IMMO section:

Smart Mode: It provides guided functions with step-by-step instructions, each function is configured as a smart guide system. Once the test vehicle is identified, a vehicle profile will display, select Yes to continue.

Expert Mode: It provides skilled technicians a convenient way to perform individual IMMO functions they need. All the function options in this mode are separated segments. If needed, technicians can only perform one segment function instead of a whole process provided in Smart Mode.

- PIN / CS Reading (Full Lost)
- Key Generation
- Key Programming
- Command Introduction
- Backup / Repair IMMO Data
- IMMO ECU Brain Reset / Adaptation
- IMMO ECU Brain Reset / Coding
- BENZ 3rd Generation IMMO Key Splicing, Full Lost, Key Programming
- BMW FEM / BDC Key Programming and ECU Adaptation
- BMW CAS4 / 3/2 Key Programming
- VW / AUDI MQB Key Programming, 48 Transponder (96-bit) Key Splicing, Full Lost, A6 Full Lost and More ...



PS: Autel G-Box and Autel APB112 not includes inside the package by default, need buy extra

II. Reliable Key Programming:

Equipped with the competent key programmer XP400, the Autel MaxiIM IM608 is a reliable key and chip programming tool that covers most of the aftermarket keys and fobs as well as MCU & EEPROM chips.

All-in-One Key & Chip Programmer XP400

This all-in-one professional car diagnostic tool Autel IM608 is destined to be the unprecedented key programming tool that you ever wanted. Equipped with MaxiFlash J2534 ECU Reprogrammer, it also comes with the Autel XP400 as the whole Key Programmer. The device is specially designed to access the key chip, read, retrieve and write key information (no vehicle connection required), along with other related key functions:

Identify / Read / Write / Generate Automotive Key
Identify Automotive Key Frequency
Read / Write EEPROM / MCU Chip
Identify / Read / Write Transponder
Support Erase / Read / Write / Password Calculation for Mercedes-Benz Infrared Key
Detect Remote Control Frequency
Read / Write IC Card


III. ECU Coding:

ECU Coding is such a potent function that enables multiple car systems to recognize each other. You can update the computer software on the vehicle to the latest version, perform the customer individual customization, alter the configuration when a component is replaced, and add new features. With top coding scanner IM608, you can easily improve your working efficiency and meet your client's need to promote car performance.



VI. Bi-Directional Control/Active Tests

IM608 comes with bi-directional control capability and can perform various vehicle-specific active tests to test the integrity of various systems and components.

The process of sending and retrieving information from a vehicle control module with a device is known as Actuation test or bi-directional control. The main aim of the actuation test function is to request the control module to perform a specific function including system tests, actuator tests, functional tests, inspection tests, reprogramming or reinitialization, thus saving diagnostic time. 

Eg: You connect a fuel pressure gauge, cycled the key and cranked the engine but you couldn’t figure out anything regarding the fuel pressure. With the actuation test function of this diagnostic tool, you can send a fuel pump command on instruction and see the proper fuel pressure, figuring out if there is a problem with the fuel pump circuit or pump.

V. Full-system Diagnosis:

Full-system diagnosis means that one for all, no need to purchasing another diagnostic scanner to complete your diagnostics. Autel MaxiIM IM608 is comparable to OE-Level diagnostic equipment, scanning all vehicle systems for over 80 makes, reading/erasing trouble codes, viewing live data. Full systems diagnosis can be performed just by touching the screen of the tablet. It is an economical choice with accurate and detailed diagnostic results.

- All System Diagnostics
- Auto Search / VIN Finding
- Reading / Deleting Error Code
- Viewing the Live Data Stream
- View Records of Failure History
- Store and Data Management Applications
- MaxiFlash JVCI ECU Programmer (Bluetooth / USB Cable)



VI. Over 30 Service Functions:

Autel scanner IM608 sets over 30 special functions in one, powerful enough to help mechanics to solve customers' problems. IM608 is not only a professional key programming tool, but also a professional maintenance tool. With IM608, you do not need to buy other tools.

Oil Reset Service: Turn off the oil light, and reset the service mileage.
Injector Coding: Write the new code to the ECU after replacement of injector, so that the injector works.
Tire Pressure Monitor System (TPMS) Service: Read TPMS data and point out issues related if there are any.
Electric Parking Brake (EPB) Service: Remind you to reset the brake pad, especially if you have replaced it.
ABS/SRS Services: Perform various bi-directional tests to check the operating conditions of both the Anti-lock Braking System and the Supplemental Restraint System.
Steering Angle Sensor (SAS) Service: Calibrating and resetting the position of the steering is just a click away.
The Diesel Particulate Filter Service: Clear the blockage in the DPF filter, to meet emission standards.
And BMS, Suspension, Throttle, Win DR Roof, Seat, Odometer, Lang Change, Headlamp, CHG Tire Size, Tooth Learning, Cylinder, Turbocharging, Trans Adaption, etc. waiting for you to explore.



Autel MaxiIM IM608 IMMO Vehicle List:

Audi:A1 A3 A4 A5 A6 RS4,B6 B7 RS5 RS6 A4 Allroad A8 S8 Q3 RSQ3 Q5 Q7 R8 TT

Seat:Alhambra Altea Altea Cordoba CupraLeon ExeoIbiza Leon Mii Toledo

Skoda:Citigo Fabia India Fabia Kamiq Karoq Octavia Rapid India Rapid Roomster Superb Yeti

VW:Amarok Arteon Atlas Beetle Bora BoraGli Caddy Crafter EOS Fox Africa
Fox EU,Fox GTI Gol County Gol(5U) Gol(5W) Golf PLUS,Golf/Rabbit(1K) Golf6 ESTATE Jetta Parati
Passat,Phaeton Polo Scirocco Sharan Suran T-Roc Tiguan Touareg Touran
Transporter5/Multivan,up,UP!/cross UP!

Fiat:500 500L 500X prox Albea Boxer Daily Doblo Doblo New Ducato Egea Fiorino Freemont Idea
Grande punto Jumper,Linea Marea Nemo Ottimo Palio Palio RST Panda Perla Promaster Punto Sinea,
Stilo Viaggio


Autel IM608 Update Log

GM Software Update V2.90
All key lost via obd
Support all models up to 2020, smart & Blade keys
APPLICABLE TO ALL AUTEL IM PRODUCTS, INCLUDING IM608. IM508 AND MAXISYS IM
Support models:
•CHEVROLET SILVERADO
•CHEVROLET CAMARO
•GMC SIERRA
•CHEVROLET EQUINOX
•CHEVROLET TRAVERSE
•CADILLAC XT5
•CHEVROLET CRUZE
•CHEVROLET TAHOE

Autel IM608 Volkswagen/Audi Software Update V4.25
MQB All Key Lost via OBD
Support all MQB models with Megamos AES key
All key lost free: $30 per vehicle

MaxiIM adds VW Audi MQB blade key all keys lost via OBD (May, 2020)
Autel have released BMW CAS4/CAS4+ through OBD update!
IM608 adds Oscilloscope & Inspection Camera Function (Feb. 2020)!

Autel MaxiIM IM608 Specifications:

Operating System Android 4.4.2, KitKat
Processor Samsung Exynos hex-core Processor (1.3GHz Quad-core ARM 
Cortex-A7 + 1.7GHz Dual-core ARM Cortex-A15)
Memory 2GB RAM & 64GB On-board Memory
Display 10.1-inch LED capacitive touch screen with 1920x1200 resolution
Connectivity Wi-Fi (802.11 a/b/g/n/ac)
USB 2.0
BT v.2.1 + EDR
SD Card (Support up to 32GB)
HDMI
Camera (rear) 8.0 Megapixel, AF with Flashlight
Sensors Gravity Accelerometer, Ambient Light Sensor (ALS)
Audio input/output Microphone
Dual Speakers
3-Band 3.5 mm stereo/standard headset jack
Power and Battery 15000 mAh 3.8 V lithium-polymer battery
Charging via 12 V AC/DC power supply with the temperature between 0°C and 45°C
Input Voltage 12 V (9-24 V)
Power Consumption 6.5 W
Operating Temp. 0 to 50°C (32 to 122°F)
Storage Temp. -20 to 60°C (-4 to 140°F)
Dimensions (W x H x D) 300 mm;(11.81”) x 220.0 mm(8.66”) x 50.0 mm (1.97”)
Weight NW: 1.42 kg (3.13 lb.)
GW: 8.655 kg (19.08 lb.)
Protocols ISO9141-2, ISO14230-2,ISO15765-4, K/L-Line,
Flashing Code,SAE-J1850 VPW, SAE-J1850PWM,
CAN ISO11898, Highspeed, Middlespeed,
Lowspeed and Singlewire CAN,GM UART,UART
Echo Byte Protocol,Honda Diag-H Protocol, TP2.0,
TP1.6SAE J1939, SAE J1708, Fault-Tolerant CAN

Establish Vehicle Communication for Powerful IMMO Operations

The IMMO operations require connecting the MaxiIM IM608 tablet to the test vehicle through the MaxiFlash
using the main cable and the included USB cable (2m). To establish proper vehicle communication to the tablet,
you need to perform the following steps:

1. Connect the MaxiFlash to the vehicle’s DLC for both communication and power source.
2. Connect the MaxiFlash to the tablet via BT pairing, or USB connection.

BT pairing is recommended as the first choice for the communication between the tablet and the J2534 ECU
Reprogrammer MaxiFlash JVCI. The working range for BT communication is about 210 feet (70 m); this means
you can perform key programming and vehicle diagnosis freely around the workshop with greater convenience.

If you use more than one MaxiFlash to connect to the test vehicles when customers are many, you can perform
key programming and vehicle diagnosis on various vehicles conveniently, by pairing the tablet separately to each of
the MaxiFlash connected to the different test vehicles, via BT, without the need to repeat the plugging and unplugging
procedure, which is unavoidable through traditional wired connection, thus saves you more time and provides more efficiency.


How to Update Autel MaxiIM IM608 Software:

Autel IM608 Update application allows you to download the latest released software.
The updates can improve the MaxiIM applications' capabilities, typically by adding new tests, new models, or enhanced
applications to the database. The Display Tablet automatically searches for available updates for all of the MaxiIM software
when it is connected to the internet. Any updates that are found can be downloaded and installed on the device. This section
describes installing an update to the MaxiIM System. A notification message displays if an update is available when the Notifications
Center function is enabled in the Settings application.

1. Make sure the Display Tablet is connected to a power source with stable access to the internet.
2. Tap the Update application button from the MaxiIM Job Menu; or tap the update notification message when received one; or tap the Update icon on Vehicle Menu in Diagnostics application. The Update application screen displays.
3. Check all available updates:
* If you decide to update all the items of IMMO software, select IMMO Tab and then tap the Update All button; if you want to update all items of diagnostic software, select Diagnose Tab and then tap the Update All button.
* If you only want to update one or some of the item(s), tap the Update button on the right column of the specific item(s).
4. Tap the Pause button to suspend the updating process. When you tap Continue to renew the update, the updating process will resume from the break point.
5. When the updating process is completed, the firmware will be installed automatically. The previous version will be replaced.

How to Pair the MaxiFlash with the IM608 Tablet?

1. Power on the tablet.
2. Insert the 16-pin vehicle data connector of the MaxiFlash to the vehicle data link connector (DLC).
3. Tap the VCI Manager application on the MaxiFlash Job Menu of the tablet.
4. Select BT from the connection mode list.
5. Tap the Scan button at the top right corner. Now the device starts searching for available pairing units.
6. The device name may display as MaxiFlash suffixed with a serial number. Select the appropriate device for pairing.
7. When paring is successfully done, the connection status displayed to the right of the device name is shown as Paired.
8. Once paired, the VCI button on the system Navigation bar at the Connection LED on the MaxiFlash illuminates solid blue.
This signifies that the tablet is connected to the MaxiFlash, and is ready to perform vehicle diagnosis.
9. Tap the paired device again to unpair it.
10. Tap the Home button on the top left to return to the MaxiIM Job Menu

Autel MaxiIM IM608 Test Report:

2013 C230 all key lost in 30 minutes thru OBD2
Golf MK5 2005 AKL - add key OK - 2min
Scirocco 2011 - add key OK - 2min40sec
Honda Civic 2006 - add key OK - 55sec
Golf V AKL 2007 without remove dashboard
Done Tiguan 2013, Scirocco and few others VAGs. Works fine on them
Autel MaxiIM IM608 program key for Volvo XC60 successfully
Benz W212 akl can be done by OBD
2014 Seat Ibiza, 2 keys added
Mercedes ML320 CDI 2007
BMW FEM system Add Key complete
Audi a3 2010 add key Sprinter 2006 add key Vw t5 2008 add key Skoda yeti 2014 add key
Added keys on Golf MK5 2005 AKL, Honda Civic 2006, Scirocco 2011, really fast!!!
Works Great on adding keys, all keys lost, G key
Mercedes E220 (All lost keys) New key works
Done 18 Civic yesterday 3 min and done
used this im608 on 2014 Vauxhall/Opel Insignia read pin code ok, programme key ok
Audi a3 2010 add key
Sprinter 2006 add key
Vw t5 2008 add key
Skoda yeti 2014 add key
completed the Mercedes E220 (All lost keys) New key works..
program a Keyless to my Toyota Camry 2018 success

Autel MaxiIM IM608 Packling List:

1x Autel MaxiIM IM608 Main Unit
1x APC101 USB Cable
1x APA101 Signal Cable
1x MaxiFlash JVCI
1x APB101+APD101(EEPROM Adaptor+EEPROM Adapter Shell)
1x APA103(EEPROM Clamp)
1x XP400
1x APB102 MB IR Cable
1x APA104 ECU Clamp
1x Main Cable
1x APB104(MCU_FQFP64)
1x APA105(MCU Clamp)
1x USB Cable (2m)
1x APB105 MCU_FQFP80
1x APA106(MC9S12 Clamp)
1x Mini USB Cable
1x APB106(MCU_FQFP144)
1x APA107(Connect Cable)
1x AC/DC 12V Adapter
1x APB107(MCU_FQFP144)
1x Quick Reference Guide
2x Light Fuse 6*30mm
1x APB108(MCU_FQFP176)
1x Packing List
1x Cigarette Lighter
1x APA002(EEPROM Socket)
1x Carrying Case 634*170*404mm
1x AAC001

Autel IM608 Review:

Review 1: I have performed an all keys lost function on an older Honda Accord with the key programmer. Changed the cylinder and the IM608 took care of it with no issues when having to program the new keys.

Review 2: Autel IM608 is able to communicate with Chrysler 200 well and configure the Ecu and the immo data. I bought it generally for its programming and immo functions, it works great on customers' cars. It's complete service functions are helpful for me.

Review 3: I purchased this scanner to diagnostic all my car the I get from salvage auctions and most of the time this car comes without keys and this scanner is like Magíc I don’t even need keys to turn on the car, best purchase I have ever made.

Review 4: I used it to erase all keys to remove lost keys and reprogram keys I had on 2009 F-150, 2006 Mazda RX8 and 2005 Acura TL. For both Mazda and Ford, you need 2 keys minimum, I had to contact tech support because I didn't have 2 keys and they helped me through the entire process on how to get a second chip from another key I had to get it all working. Great support and product! Highly recommend it!

Review 5: Money well spent. I have used this tool over almost a week now. I love it.
This tool provides all the info you need to perform any all of the programming tasks. I was able to program a key to a 2005 Mini Cooper on my first try. I love how the diagnostic app comes along with it. I’ve been using a Autel MaxiSys for the past two years. I love that i can have best of both worlds. Both the immo application and the diagnostic application.

Review 6: Great all-around tool! To do Toyota keys you'll need the APB112 and the G-Box helps with the Mercedes keys... Scan tool wise it is equivalent to the MS908S. I haven't gotten into heavy in-depth work with it yet but so far, it's been up to the task.

Review 7: I purchased this Autel IM608 a month ago. I detected several cars in my workshop with this key programmer. It was the first thing I did when I got it to make sure it was working well. Autel IM608 really read the IR signals and the actual transponder data. Yesterday I run a Mercedes IR key programming with this autel scanner on Mercedes r320, 2007. I used the blank keys: 315 and 433 keys. It took me about 10 minutes to get it done. Hopefully, this week I’ll get chances to do more key programming or IMMO for different cars.

FAQ:

Q: The imo functions of the im508 is the same of a im608 
A: Hello , of course not the same , Im508 + xp400= same key programing as IM608 

Q: Does this device require its own battery? I mean would you have to replace batteries in it?
A: no need for battery, when connect with obd2, it will import battery supply from device

Q: Im 608 working on tokens method?
A:  no need tokens, but need yearly subscription if you want update new software

Q: Does the im608 has the same obd2 diagnostic function as mk908, but much powerful than mk908 in professional immo keys programming?
A: Yes, you are right, IM608 has the same OBD2 functions as MK908. But in IMMO function, IM608 is a professional and most powerful IMMO tool.

Q: The ability to reprogram key fobs for door lock and ignition functions.2006 BMW 325i VIN:WBAVB13516PT26948?
A: Yes, it supports

Q: Does it support online programming for Benz and BMW?
A: No, it do not support this

Q: Do autel im608 pro erase key programing also? how this can be done? for suzuki key  and aso toyota used keys to erase?
A: Yes, during the key programming process, the keys will be erased. and you will need to programme the keys back to vehicles no matter if it is orginal keys or new keys. You can refer to those youtube case studies so you can have a better understanding of how it works

Q: Does IM608 can read password for all Ford?
A: No password need for Ford

Q: IM608 Can make key fob copies?@Autel IM support?
A: Yes, it can make the key copy for some models, but mostly are for the key learning functions, connect the device to the vehilce through ODB then learn the key to the vehicles.  

---

Marchio Caldo Prodotti:

---

2021 Launch X431 Pros V4.0 :

---

Modalità di spedizione e tempi di consegna:

UK & Amazon EU(Ceca) Spedizione: 3-5 giorni lavorativi:  Abbiamo immagazzinato articoli di vendita caldi in EU (Ceca) e Amazon EU(Ceca) Warehouse, che è più conveniente per te. TASSE gratuita, spedizione più veloce con un prezzo più economico.
Spedizione DHL: 3-4 giorni lavorativi, per aiutarti nella liquidazione, ti aiuteremo a dichiarare un prezzo più basso sulla liquidazione della fattura. Se l'indirizzo è remoto, il cliente ha bisogno di pagare il trasporto remoto o spediremo tramite posta normale o Yanwen Express.Ma ora spediamo con DHL ce dogana da pagare,qundi se non vuoi pagare dogana spese spediamo con YANWEN EXPRESS.
Yanwen Express: 5-10 giorni lavorativi, di solito nessuna tassa per i paesi europei o l'area remota. La tassa era pre-pagata, quando il pacchetto è stato raggiunto, non c'è nessuna tassa per i clienti.


 

---

Qualsiasi domanda, non esitate a contattarci:

Whatsapp: +86 18580434781（Risposta 24 ore）
Skype: AutoOBD.it（Risposta 24 ore）
Email: Sales@AutoOBD2.it（Visualizza ogni giorno）
Live-Chat: Chatta con noi Online（Risposta 24 ore）